GB/T 8014.1-2005
ActiveAnodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 1:The measuring principle
铝及铝合金阳极氧化 氧化膜厚度的测量方法 第1部分:测量原则
Application Summary AI generated
This standard specifies the fundamental principles for measuring the thickness of anodic oxide coatings on aluminium and its alloys. It is applied in manufacturing and quality control settings, such as in the production of architectural profiles, automotive components, and consumer electronics, to ensure coating thickness meets specified requirements. The standard provides the basis for selecting appropriate measurement methods, including eddy current and microscopic techniques, for both laboratory and on-site testing.
Related Standards
GB/T 19353-2003
Vitreous and porcelain enamels--Corrosion tests in closed systems
GB/T 19354-2003
Vitreous and porcelain enamels for aluminium--Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
GB/T 4957-2003
Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness--Eddy current
GB/T 9791-2003
Chromate conversion coatings on zinc，cadmium，aluminium-zinc alloys and zinc-aluminium alloys--Test methods
GB/T 4956-2003
Non-magnetic coatings on magnetic substrates--Measurement of coating thickness--Magnetic method
GB/T 19355-2003
Protection against corrosion ofiron and steel in structures--Zinc and aluminum coatings--Guidelines
GB/T 19356-2003
Thermal spraying--Powders--Composition and technical supply conditions
GB/T 9792-2003
Conversion coatings on metallic materials--Determination of coating mass per unit area--Gravimetric methods
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.