GB/T 8013.2-2007
AbolishedAnodic oxide coatings and organic polymer coatings on aluminium and its alloys - Part 2: Combined anodic oxide coating
铝及铝合金阳极氧化膜与有机聚合物膜 第2部分：阳极氧化复合膜
Application Summary AI generated
This standard specifies the technical requirements, test methods, and inspection rules for combined anodic oxide coatings applied to aluminum and its alloys. It is used in the manufacturing and quality control of products requiring enhanced corrosion resistance and paint adhesion, such as architectural aluminum profiles, automotive trim, and consumer electronics components. The standard ensures consistent performance of these dual-layer coatings in industrial finishing processes.
Related Standards
GB/T 9792-2003
Conversion coatings on metallic materials--Determination of coating mass per unit area--Gravimetric methods
GB/T 19355-2003
Protection against corrosion ofiron and steel in structures--Zinc and aluminum coatings--Guidelines
GB/T 19356-2003
Thermal spraying--Powders--Composition and technical supply conditions
GB/T 9791-2003
Chromate conversion coatings on zinc，cadmium，aluminium-zinc alloys and zinc-aluminium alloys--Test methods
GB/T 19353-2003
Vitreous and porcelain enamels--Corrosion tests in closed systems
GB/T 19354-2003
Vitreous and porcelain enamels for aluminium--Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
GB/T 4957-2003
Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness--Eddy current
GB/T 4956-2003
Non-magnetic coatings on magnetic substrates--Measurement of coating thickness--Magnetic method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.