GB/T 7672.22-2008
ActiveGlass-fiber wound winding wires - Part 22: Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
玻璃丝包绕组线 第22部分：155级浸漆玻璃丝包铜圆线和玻璃丝包漆包铜圆线
Application Summary AI generated
This standard specifies the requirements for glass-fiber wound round copper wire that is either bare or enameled and impregnated with resin or varnish, designed for a temperature index of 155. It is applied in the manufacturing of electrical equipment such as motors, transformers, and generators where windings must withstand moderate thermal stress and require enhanced insulation protection. The standard ensures consistent performance in industrial contexts involving high humidity or mechanical abrasion during coil winding and operation.
Related Standards
GB/T 19666-2005
Flame retardant and fire resistant wires and cables General
GB/T 6108.3-2003
Basic dimensions of winding wires--Part 3: Dimensions of conductors of insulated rectangular copper winding wires
GB/T 19216.21-2003
Tests for electric cables under fire conditions--Circuit integrity--Part 21: Procedures and requirements--Cables of rated voltage up to and including 0.6/1.0kV
GB/T 19216.11-2003
Tests for electric cables under fire conditions--Circuit integrity--Part 11: Apparatus--Fire alone at a flame temperature of at least 750℃
GB/T 6108.2-2003
Basic dimensions of winding wires--Part 2: Maximum overall diameters of enamelled round winding wires
GB/T 18889-2002
Electric cables-test methods for accessories for power cables with rated voltages from 6kV(Um=7.2kV)up to 35kV(Um=40.5kV)
GB/T 18487.3-2001
Electric vehicle conductive charging system--A.C./D.C.electric vehicle charging station
GB/T 18487.2-2001
Electric vehicle conductive charging system--Electric vehicles requirements for conductiveconnection to an A.C./D.C.supply
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.