GB/T 7588.2-2020
ActiveSafety rules for the construction and installation of lifts—Part 2: Design rules, calculations, examinations and tests of lift components
电梯制造与安装安全规范 第2部分：电梯部件的设计原则、计算和检验
Application Summary AI generated
This standard specifies design principles, calculation methods, and examination and testing requirements for lift components such as guide rails, safety gears, and buffers. It is applied in the manufacturing and installation of electric lifts in buildings, ensuring component safety and reliability during operation. The standard is used by engineers and inspectors in the elevator industry for compliance verification and quality assurance.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.