GB/T 6730.83-2022
ActiveIron ores—Determination of loss on ignition—Gravimetric method corrected by hygroscopic water
铁矿石 灼烧减量的测定 吸湿水校正重量法
Application Summary AI generated
This standard specifies a gravimetric method for determining the loss on ignition in iron ores, corrected for hygroscopic moisture content. It is applied in the mining and metallurgical industries for quality control and trade of iron ores, ensuring accurate assessment of volatile components during processing or smelting. The method is particularly relevant for laboratories conducting routine analysis of iron ore samples to evaluate their thermal behavior and chemical composition.
Related Standards
GB/T 1819.10-2004
Methods for chemical analysis of tin concentrates--Determination of sulphur content--The high frequency infrared absorption method and the combustion potassium iodate titrimetric method
GB/T 1819.1-2004
Methods for chemical analysisof tin concentrates--Determination of water content--The weighing method
GB/T 1819.11-2004
Methods for chemical analysis of tin concentrates--Determination of aluminum oxide content--The chromazuzol S spectrophotometric method
GB/T 1819.5-2004
Methods for chemical analysis of tin concentrates--Determination of arsenic content--The molybdoantimonyarsenate blue spectrophotometric method and the distillation-iodimetric titrimetric method
GB/T 1819.7-2004
Methods for chemical analysis of tin concentrates--Determination of bismuth content--Flame atomicabsorption spectrometric method
GB/T 1819.12-2004
Methods for chemical analysis of tin concentrates--Determination of silicon dioxide content--The silicomolybdenum blue spectrophotometric method
GB/T 1819.13-2004
Methodsfor chemical analysis of tin concentrates--Determination of magnesium oxide andcalcium oxide contents--Flame atomic absorption spectrometric method
GB/T 1819.2-2004
Methods for chemical analysis of tin concentrates--Determination of tin content--The potassium iodate titrimetric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.