GB/T 6144-2010
ActiveSynthetic cutting fluids
合成切削液
Application Summary AI generated
GB/T 6144-2010 specifies the technical requirements, test methods, inspection rules, and packaging for synthetic cutting fluids used in metalworking processes. It applies to water-based, non-oil cutting fluids formulated without mineral oil, primarily employed in machining operations such as turning, milling, and grinding where cooling, lubrication, and corrosion inhibition are needed. This standard is used by manufacturers and quality inspectors in the petroleum and chemical industries to ensure product consistency and performance in industrial metal cutting applications.
Related Standards
GB/T 19230.2-2003
Test method for evaluating gasoline detergent in use--Part 2: Test method for demulsibility of gasoline detergent
GB/T 19230.1-2003
Test method for evaluating gasoline detergent in use--Part 1: Test method for rust-preventing characteristics of gasoline detergent
GB/T 19230.6-2003
Test method for evaluating gasoline detergent in use--Part 6: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(M111 method)
GB/T 19230.5-2003
Test method for evaluating gasoline detergent in use--Part 5: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(Ford 2.3L method)
GB/T 19230.4-2003
Test method for evaluating gasoline detergent in use--Part 4: Test method for influence of induction system deposit(ISD)tendencies of gasoline detergent
GB/T 19230.3-2003
Test method for evaluating gasoline detergent in use--Part 3: Test method for evaluating gasoline detergent produced effect forelectronic port fuel injector(PFI) fouling
GB/T 5304-2001
Asphalt thin-film oven test method
GB/T 2294-1997
Solid products of coal carbonization--Determination of softening point
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.