GB/T 6109.11-2008
AbolishedEnamelled round winding wire - Part 11: Solderable polyurethane enamelled round copper wire overcoated with polyamide,class 155
漆包圆绕组线 第11部分：155级聚酰胺复合直焊聚氨酯漆包铜圆线
Application Summary AI generated
This standard specifies requirements for a specific type of enamelled copper wire with a dual coating of solderable polyurethane and a polyamide overcoat, rated for thermal class 155. It is applied in the manufacturing of electrical components such as transformers, motors, and relays where the wire must withstand higher operating temperatures while remaining directly solderable without stripping the insulation. The standard ensures consistent performance in automated winding processes and reliability in electrical equipment operating at up to 155°C.
Related Standards
GB/T 19666-2005
Flame retardant and fire resistant wires and cables General
GB/T 6108.3-2003
Basic dimensions of winding wires--Part 3: Dimensions of conductors of insulated rectangular copper winding wires
GB/T 19216.21-2003
Tests for electric cables under fire conditions--Circuit integrity--Part 21: Procedures and requirements--Cables of rated voltage up to and including 0.6/1.0kV
GB/T 19216.11-2003
Tests for electric cables under fire conditions--Circuit integrity--Part 11: Apparatus--Fire alone at a flame temperature of at least 750℃
GB/T 6108.2-2003
Basic dimensions of winding wires--Part 2: Maximum overall diameters of enamelled round winding wires
GB/T 18889-2002
Electric cables-test methods for accessories for power cables with rated voltages from 6kV(Um=7.2kV)up to 35kV(Um=40.5kV)
GB/T 18487.3-2001
Electric vehicle conductive charging system--A.C./D.C.electric vehicle charging station
GB/T 18487.2-2001
Electric vehicle conductive charging system--Electric vehicles requirements for conductiveconnection to an A.C./D.C.supply
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.