GB/T 5270-2005
AbolishedMetallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion
金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述
Application Summary AI generated
This standard provides a review of available test methods for assessing the adhesion strength of electrodeposited and chemically deposited metallic coatings on metallic substrates. It is applied in manufacturing and quality control contexts to guide engineers and inspectors in selecting appropriate adhesion tests for coated components, such as automotive parts, electronic connectors, and industrial hardware. The standard helps ensure coating reliability and performance by outlining procedures like bend, burnish, and peel tests.
Related Standards
GB/T 19355-2003
Protection against corrosion ofiron and steel in structures--Zinc and aluminum coatings--Guidelines
GB/T 9792-2003
Conversion coatings on metallic materials--Determination of coating mass per unit area--Gravimetric methods
GB/T 19356-2003
Thermal spraying--Powders--Composition and technical supply conditions
GB/T 4956-2003
Non-magnetic coatings on magnetic substrates--Measurement of coating thickness--Magnetic method
GB/T 9791-2003
Chromate conversion coatings on zinc，cadmium，aluminium-zinc alloys and zinc-aluminium alloys--Test methods
GB/T 4957-2003
Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness--Eddy current
GB/T 19354-2003
Vitreous and porcelain enamels for aluminium--Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
GB/T 19353-2003
Vitreous and porcelain enamels--Corrosion tests in closed systems
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.