GB/T 5168-2008
AbolishedMicrostructure and macrostructure examination for α-β titanium alloys
α-β钛合金高低倍组织检验方法
Application Summary AI generated
This standard specifies the methods for examining the microstructure and macrostructure of α-β titanium alloys, including sample preparation, etching techniques, and evaluation criteria. It is applied in the metallurgical industry for quality control and material verification during the production, processing, and acceptance testing of titanium alloy products such as bars, plates, and forgings. The standard ensures consistent assessment of grain size, phase distribution, and defects like porosity or segregation in these alloys.
Related Standards
GB/T 5153-2003
Designation and composition of wrought magnesium and magnesium alloys
GB/T 12690.10-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of phosphorus content by molybdenum blue spectrophotometric method
GB/T 12690.11-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of magnesium content--Flame atomic absorptionspectrometric method
GB/T 12690.12-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of thorium content--Arsenazo III spectrophotometric method and inductively coupled plasma mass spectrum method
GB/T 12690.13-2003
Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum
GB/T 12690.4-2003
Chemical analysis methods for non-rare earth impurities ofrare earth metals and their oxides--Determination of oxygen and nitrogen content--Impulse-infrared and impulse-thermal conductance absorption method
GB/T 12690.5-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of Al、Cr、Mn、Fe、Co、Ni、Cu、Zn、Pb content by inductively coupled plasma atomic emission spectrographic method--Determination of Co、Mn、Pb、N
GB/T 12690.6-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of iron content--Kalium thiocyanate，1，10-phenanthroline spectrophotometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.