GB/T 4324.8-2008
ActiveMethods for chemical analysis of tungsten - Determination of nickel content - The inductively coupled plasma atomic emission spectrometry 、 flame atomic absorption spectrometry and dimethylglyoxime gravimetry
钨化学分析方法 镍量的测定 电感耦合等离子体原子发射光谱法、火焰原子吸收光谱法和丁二酮肟重量法
Application Summary AI generated
This standard specifies three analytical methods—inductively coupled plasma atomic emission spectrometry, flame atomic absorption spectrometry, and dimethylglyoxime gravimetry—for determining nickel content in tungsten materials. It is applied in the metallurgical industry for quality control and chemical analysis of tungsten products, such as tungsten powders, alloys, and compounds, to ensure compliance with compositional specifications. The standard is used in testing laboratories and production facilities to verify nickel levels during manufacturing or material acceptance.
Related Standards
GB/T 5153-2003
Designation and composition of wrought magnesium and magnesium alloys
GB/T 12690.13-2003
Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum
GB/T 12690.4-2003
Chemical analysis methods for non-rare earth impurities ofrare earth metals and their oxides--Determination of oxygen and nitrogen content--Impulse-infrared and impulse-thermal conductance absorption method
GB/T 12690.10-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of phosphorus content by molybdenum blue spectrophotometric method
GB/T 12690.12-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of thorium content--Arsenazo III spectrophotometric method and inductively coupled plasma mass spectrum method
GB/T 12690.11-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of magnesium content--Flame atomic absorptionspectrometric method
GB/T 12690.5-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of Al、Cr、Mn、Fe、Co、Ni、Cu、Zn、Pb content by inductively coupled plasma atomic emission spectrographic method--Determination of Co、Mn、Pb、N
GB/T 12690.6-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of iron content--Kalium thiocyanate，1，10-phenanthroline spectrophotometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.