GB/T 41863-2022
ActiveNon-contact water supply devices—General technical specifications for water saving performance
非接触式给水器具 节水性能通用技术条件
Application Summary AI generated
This standard specifies the general technical requirements for evaluating the water-saving performance of non-contact water supply devices, such as automatic faucets and flush valves. It is applied in the construction industry for the design, testing, and procurement of sensor-activated plumbing fixtures in public and commercial buildings. The standard ensures these devices meet minimum efficiency criteria to reduce water waste in high-traffic restrooms and similar settings.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.