GB/T 41122-2021
ActiveRequirements for lifts used to assist in building evacuation
用于辅助建筑物人员疏散的电梯要求
Application Summary AI generated
GB/T 41122-2021 specifies technical requirements for lifts designed to assist in the evacuation of people from buildings during emergencies, such as fires or earthquakes. It applies to the design, installation, and testing of evacuation lifts in high-rise commercial, residential, and public buildings, ensuring they remain operational under controlled conditions to facilitate safe egress. The standard is used by architects, engineers, and building safety inspectors to integrate these lifts into emergency evacuation plans and compliance assessments.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.