GB/T 4103.9-2012

Active

Methods for chemical analysis of lead and lead alloys - Part 9: Determination of calcium content

铅及铅合金化学分析方法 第9部分：钙量的测定

Standard Type
GBT
ICS
77.120.60
CCS
H13
Status
Active
Issue Date
2012-12-31
Implementation
2013-10-01
Centralized Committee
中国有色金属工业协会
Issuing Authority
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

Application Summary AI generated

This standard specifies the method for determining the calcium content in lead and lead alloys, primarily using flame atomic absorption spectrometry. It is applied in the metallurgical industry for quality control and material certification of lead-based products, such as lead alloys used in batteries, cables, and radiation shielding. The standard ensures accurate calcium measurement to verify compliance with material specifications during production and testing.

Related Standards

GB/T 5153-2003 Designation and composition of wrought magnesium and magnesium alloys GB/T 12690.13-2003 Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum GB/T 12690.12-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of thorium content--Arsenazo III spectrophotometric method and inductively coupled plasma mass spectrum method GB/T 12690.4-2003 Chemical analysis methods for non-rare earth impurities ofrare earth metals and their oxides--Determination of oxygen and nitrogen content--Impulse-infrared and impulse-thermal conductance absorption method GB/T 12690.10-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of phosphorus content by molybdenum blue spectrophotometric method GB/T 12690.11-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of magnesium content--Flame atomic absorptionspectrometric method GB/T 12690.5-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of Al、Cr、Mn、Fe、Co、Ni、Cu、Zn、Pb content by inductively coupled plasma atomic emission spectrographic method--Determination of Co、Mn、Pb、N GB/T 12690.6-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of iron content--Kalium thiocyanate，1，10-phenanthroline spectrophotometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.