GB/T 40722.2-2021

Active

Styrene-butadiene rubber(SBR)—Determination of the microstructure of solution-polymerized SBR—Part 2:FTIR with ATR method

苯乙烯-丁二烯橡胶（SBR） 溶液聚合SBR微观结构的测定 第2部分：红外光谱ATR 法

Standard Type
GBT
ICS
83.060
CCS
G35
Status
Active
Issue Date
2021-10-11
Implementation
2022-05-01
Centralized Committee
中国石油和化学工业联合会
Issuing Authority
国家市场监督管理总局、中国国家标准化管理委员会

Application Summary AI generated

This standard specifies the use of Fourier Transform Infrared Spectroscopy (FTIR) with Attenuated Total Reflectance (ATR) to determine the microstructure of solution-polymerized styrene-butadiene rubber (S-SBR), specifically measuring the content of styrene and the three butadiene isomers (cis-1,4, trans-1,4, and vinyl-1,2). It is applied in the rubber and plastics industry for quality control, raw material verification, and product development of S-SBR used in high-performance tires, footwear, and other engineered elastomers. The method provides a rapid, non-destructive testing alternative to traditional techniques, ensuring consistent polymer composition for optimized processing and end-use performance.

Related Standards

NY/T 735-2003 Raw natural rubber - Technical rule for production of radial tire rubber GB/T 7761-2003 Rubber--Determination of adhesion to rigid materials using conical shaped parts GB/T 19242-2003 Rubber，vulcanized--Determination of creep in compression or shear GB/T 19243-2003 Rubber，vulcanized or thermoplastic--Methods of test for staining in contact with organic material GB/T 7755-2003 Rubber，vulcanized of thermoplastic--Determination of permeability to gases GB/T 11202-2003 Rubber--Determination of iron content--1，10-Phenanthroline photometric method GB/T 9881-2003 Rubber--Vocabulary GB/T 7760-2003 Rubber，vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.