GB/T 39679-2020
AbolishedIntegrated circuit card device for lifts
电梯IC卡装置
Application Summary AI generated
This standard specifies technical requirements, test methods, and inspection rules for integrated circuit (IC) card devices used in lifts. It is applied in the construction industry to ensure the safety, reliability, and interoperability of access control systems in elevators, covering functions such as card reading, authorization, and data management. The standard is relevant for manufacturers, installers, and inspectors of lift IC card devices in residential, commercial, and public buildings.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.