GB/T 38979-2020
ActiveSanitary wares—Test method for flushing noise of toilet
卫生陶瓷 坐便器冲洗噪声试验方法
Application Summary AI generated
This standard specifies a laboratory test method for measuring the noise generated during the flushing cycle of a toilet. It is applied by manufacturers and testing laboratories to evaluate and compare the acoustic performance of sanitary ware products, particularly for residential and commercial building installations where noise control is a key comfort requirement. The standard ensures consistent measurement procedures for product certification and quality control in the construction industry.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.