GB/T 38390-2019
ActiveSafety and control devices for gas burners and gas-burning appliances—Particular requirements—Pressure sensing device
燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 压力传感装置
Application Summary AI generated
This standard specifies the particular safety, construction, and performance requirements for pressure sensing devices used in gas burners and gas-burning appliances. It applies to devices that monitor gas or air pressure to ensure safe operation, such as those in residential gas water heaters, commercial boilers, and industrial gas-fired equipment. The standard is used by manufacturers and testing laboratories to verify device reliability and safety under normal and fault conditions.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.