GB/T 38057-2019
ActiveUrban water supply pumping station integration adjustment and control system
城镇供水泵站一体化综合调控系统
Application Summary AI generated
This standard specifies the technical requirements, system architecture, and performance indicators for integrated control systems in urban water supply pumping stations. It is applied in the design, installation, commissioning, and operation of pumping stations within municipal water distribution networks to ensure efficient pressure regulation and energy-saving control. The standard is primarily used by water utilities and engineering contractors for system integration and quality acceptance in urban water supply infrastructure projects.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.