GB/T 37894-2019
ActiveTechnical requirements for ozone generator for water and wastewater treatment
水处理用臭氧发生器技术要求
Application Summary AI generated
This standard specifies the technical requirements, test methods, inspection rules, and marking for ozone generators used in water and wastewater treatment. It is applied in the design, manufacturing, and quality verification of ozone generation equipment for municipal drinking water plants, industrial wastewater treatment facilities, and swimming pool water disinfection systems. The standard ensures consistent ozone output, energy efficiency, and safety performance in these treatment contexts.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.