GB/T 3620.2-2007
AbolishedTitanium and titanium alloys-permissible variations of chemical composition for wrought product analysis
钛及钛合金加工产品化学成分允许偏差
Application Summary AI generated
This standard specifies the permissible deviations in chemical composition for the analysis of wrought titanium and titanium alloy products. It is applied in the metallurgical industry for quality control and acceptance testing of semi-finished or finished products like plates, bars, and tubes. The standard ensures that the measured composition of a specific product lot falls within acceptable tolerances from the nominal grade specification.
Related Standards
GB/T 5153-2003
Designation and composition of wrought magnesium and magnesium alloys
GB/T 12690.10-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of phosphorus content by molybdenum blue spectrophotometric method
GB/T 12690.12-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of thorium content--Arsenazo III spectrophotometric method and inductively coupled plasma mass spectrum method
GB/T 12690.11-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of magnesium content--Flame atomic absorptionspectrometric method
GB/T 12690.4-2003
Chemical analysis methods for non-rare earth impurities ofrare earth metals and their oxides--Determination of oxygen and nitrogen content--Impulse-infrared and impulse-thermal conductance absorption method
GB/T 12690.13-2003
Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum
GB/T 12690.6-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of iron content--Kalium thiocyanate，1，10-phenanthroline spectrophotometric method
GB/T 12690.5-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of Al、Cr、Mn、Fe、Co、Ni、Cu、Zn、Pb content by inductively coupled plasma atomic emission spectrographic method--Determination of Co、Mn、Pb、N
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.