GB/T 33817-2017

Active

Method for determination of the carbon content on the inner surface of copper and copper-alloy tube

铜及铜合金管材内表面碳含量的测定方法

Standard Type
GBT
ICS
77.120.99
CCS
H13
Status
Active
Issue Date
2017-05-31
Implementation
2017-12-01
Centralized Committee
中国有色金属工业协会
Issuing Authority
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

Application Summary AI generated

This standard specifies a test method for determining the carbon content on the inner surface of copper and copper-alloy tubes. It is applied in the metallurgical industry, specifically for quality control and inspection of copper tubes used in applications such as air conditioning, refrigeration, and heat exchangers, where residual carbon films can affect corrosion resistance and thermal performance.

Related Standards

GB/T 5153-2003 Designation and composition of wrought magnesium and magnesium alloys GB/T 12690.4-2003 Chemical analysis methods for non-rare earth impurities ofrare earth metals and their oxides--Determination of oxygen and nitrogen content--Impulse-infrared and impulse-thermal conductance absorption method GB/T 12690.12-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of thorium content--Arsenazo III spectrophotometric method and inductively coupled plasma mass spectrum method GB/T 12690.11-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of magnesium content--Flame atomic absorptionspectrometric method GB/T 12690.13-2003 Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum GB/T 12690.10-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of phosphorus content by molybdenum blue spectrophotometric method GB/T 12690.5-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of Al、Cr、Mn、Fe、Co、Ni、Cu、Zn、Pb content by inductively coupled plasma atomic emission spectrographic method--Determination of Co、Mn、Pb、N GB/T 12690.6-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of iron content--Kalium thiocyanate,1,10-phenanthroline spectrophotometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.