GB/T 32518.1-2016
ActiveField test code of controlled shunt reactor of extra high voltage—Part 1: Multistage controlled shunt reactor
超高压可控并联电抗器现场试验技术规范 第1部分：分级调节式
Application Summary AI generated
This standard specifies the field test methods, procedures, and evaluation criteria for multistage controlled shunt reactors used in extra-high voltage (EHV) power systems (typically 330 kV to 750 kV). It is applied during the commissioning, maintenance, and troubleshooting of these reactors at substations or power plants to verify their electrical performance, insulation integrity, and control functionality under real operating conditions. The standard ensures the safe and reliable integration of reactive power compensation equipment into the transmission grid.
Related Standards
GB/T 19663-2005
Terms for Lightning Protection of Information system
GB/Z 14429-2005
Telecontrol equipmet and systems Part1:General considerations Section3:Glossary
GB/Z 25320.3-2010
Power systems management and associated information exchange - Data and communications security - Part 3: Communication network and system security -Profiles including TCP/IP
GB/Z 25320.1-2010
Power systems management and associated information exchange - Data and communications security - Part 1: Communication network and system security -Introduction to security issues
GB/Z 25320.4-2010
Power systems management and associated information exchange - Data and communications security - Part 4: Profiles including MMS
GB/Z 25320.6-2011
Power systems management and associated information exchange - Data and communications security - Part 6: Security for IEC 61850
GB/Z 25320.5-2013
Power systems management and associated information exchange - Data and communications security - Part 5: Security for GB/T 18657 and derivatives
GB/Z 25320.2-2013
Power systems management and associated information exchange - Data and communications security - Part 2: Glossary of terms
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.