GB/T 29653-2013

Active

Manganese ores - Determination of size distribution by sieving

锰矿石 粒度分布的测定 筛分法

Standard Type
GBT
ICS
73.060.20
CCS
D32
Status
Active
Issue Date
2013-09-06
Implementation
2014-05-01
Centralized Committee
中国钢铁工业协会
Issuing Authority
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

Application Summary AI generated

This standard specifies the sieving method for determining the particle size distribution of manganese ores. It is applied in the mining and metallurgical industries for quality control and process optimization, particularly during ore beneficiation, transportation, and smelting. The method ensures consistent measurement of granular material for trade and industrial use.

Related Standards

GB/T 1819.5-2004 Methods for chemical analysis of tin concentrates--Determination of arsenic content--The molybdoantimonyarsenate blue spectrophotometric method and the distillation-iodimetric titrimetric method GB/T 1819.7-2004 Methods for chemical analysis of tin concentrates--Determination of bismuth content--Flame atomicabsorption spectrometric method GB/T 1819.4-2004 Methodsfor chemical analysis of tin concentrates--Determination of lead content--Flameatomic absorption spectrometric method and EDTA titrimetric method GB/T 1819.2-2004 Methods for chemical analysis of tin concentrates--Determination of tin content--The potassium iodate titrimetric method GB/T 1819.12-2004 Methods for chemical analysis of tin concentrates--Determination of silicon dioxide content--The silicomolybdenum blue spectrophotometric method GB/T 1819.3-2004 Methods for chemical analysis of tin concentrates--Determination of iron content--The cerium sulfate titrimetric method GB/T 1819.13-2004 Methodsfor chemical analysis of tin concentrates--Determination of magnesium oxide andcalcium oxide contents--Flame atomic absorption spectrometric method GB/T 1819.8-2004 Methods for chemical analysis of tin concentrates--Determination of zinc content--Flame atomic absorption spectrometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.