GB/T 28757-2012
ActiveCranes other than mobile，tower and floating cranes and tower cranes - General requirements for stability
除流动式、塔式和浮式起重机以外的起重机 稳定性基本要求
Application Summary AI generated
This standard specifies the general stability requirements for cranes that are not mobile, tower, or floating types, such as overhead traveling cranes, gantry cranes, and portal cranes. It is applied in the design, calculation, and testing phases to ensure these cranes resist overturning under rated loads, wind, and dynamic forces during operation. The standard is used by manufacturers and safety inspectors in industrial settings like factories, warehouses, and shipyards for material handling equipment.
Related Standards
GB/T 27696-2011
Forged steel eyebolts grade 4 for general lifting purposes
GB/T 19683-2005
Rail mounted transtainer
GB/T 18875-2002
Cranes--Spare parts manual
GB/T 18874.5-2002
Cranes--Information to be provided--Part 5:Overhead travelling cranes and portal bridge cranes
GB/T 18874.1-2002
Cranes--Information to be provided--Part 1:General
GB/T 18453-2001
Cranes--Maintenance manual--Part 1:General
GB/T 18439-2001
Harbour crane--General requirements for stability
GB/T 18438-2001
Harbour crane--Acceptance test rule
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.