GB/T 28621-2012
AbolishedSafety rules for the construction and installation of new lifts in existing building
安装于现有建筑物中的新电梯制造与安装安全规范
Application Summary AI generated
This standard specifies safety requirements for the design, manufacture, and installation of new elevators placed into existing buildings, addressing constraints like limited shaft space and structural load capacity. It is applied in construction and renovation projects where a new lift must be integrated into an older structure without a pre-existing elevator shaft, ensuring compliance with modern safety norms. The standard guides engineers, architects, and installers in China to adapt elevator systems safely to non-standard building conditions.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.