GB/T 28514.3-2012

Active

IPv6 routing protocol - Part 3: Intermediate system to intermediate system intra-domain routing information exchange protocol (IS-ISv6)

支持IPv6的路由协议技术要求 第3部分：中间系统到中间系统域内路由信息交换协议(IS-ISv6)

Standard Type
GBT
ICS
33.180
CCS
M33
Status
Active
Issue Date
2012-06-29
Implementation
2012-10-01
Centralized Committee
工业和信息化部（通信）
Issuing Authority
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

Application Summary AI generated

This standard specifies the technical requirements for the Intermediate System to Intermediate System (IS-IS) routing protocol to support IPv6, defining how routers exchange intra-domain routing information within an autonomous system. It is applied in telecommunications networks and large-scale IP backbone infrastructures where IS-IS is used as an interior gateway protocol (IGP) to ensure efficient and interoperable IPv6 route propagation. The standard is critical for network equipment manufacturers and operators deploying IPv6 in carrier-grade or enterprise networks.

Related Standards

GB/T 18311.5-2003 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-5:Examinations and measurements--Wavelength dependence of attenuation GB/T 7424.4-2003 Optical fiber cables--Part 4-1:Section specification--Optical fibre composite overhead ground wire GB/T 18311.4-2003 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-4:Examinations and measurements--Attenuation GB/T 18311.34-2003 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-34:Examinations and measurements--Attenuation of random mated connectors GB/T 18311.40-2003 Fibre optic interconnecting devices and passivecomponents--Basic test and measurement procedures--Part 3-40:Examinations and measurements--Extinction ratio of a polarization maintaining(pm)fibre pigtailed connector GB/T 7424.1-2003 Generic specification for optical fibre cables--Part 1:General GB/T 18311.1-2003 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-1:Examinations and measurements--Visual examination GB/T 18310.26-2003 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-26:Tests--Salt mist
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.