GB/T 25217.5-2019

Active

Methods for test, monitoring and prevention of rock burst—Part 5: Monitoring method of earth-sound

冲击地压测定、监测与防治方法 第5部分:地音监测方法

Standard Type
GBT
ICS
73.010
CCS
D20
Status
Active
Issue Date
2019-10-18
Implementation
2020-05-01
Centralized Committee
中国煤炭工业协会
Issuing Authority
国家市场监督管理总局、中国国家标准化管理委员会

Application Summary AI generated

This standard specifies the technical requirements for monitoring rock bursts using earth-sound (acoustic emission) methods in underground coal mines. It is applied to detect and analyze micro-seismic activity within coal and rock masses to provide early warnings of dynamic disasters. The standard is used by mining engineers and safety inspectors for real-time monitoring and risk assessment in high-stress mining environments.

Related Standards

GB/T 20104-2006 Method for identifying tendency of coal to spontaneous combustion by oxygen absorption with chromatograph GB/T 23561.9-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 9: Methods for determining the triaxial strength and deformation parameters of coal and rock GB/T 23561.8-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 8: Methods for determining the deformation parameters of coal and rock GB/T 23561.7-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 7: Methods for determining the uniaxial compressive strength and counting softening coefficient GB/T 23561.6-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 6: Methods for determining the moisture content of coal and rock GB/T 23561.5-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 5: Methods for determining the water absorbability of coal and rock GB/T 23561.4-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 4: Methods for calculating the porosity of coal and rock GB/T 23561.3-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 3: Methods for determining the block density of coal and rock
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.