GB/T 25217.4-2019

Active

Methods for test, monitoring and prevention of rock burst—Part 4: Monitoring method of microseismicity

冲击地压测定、监测与防治方法 第4部分:微震监测方法

Standard Type
GBT
ICS
73.010
CCS
D20
Status
Active
Issue Date
2019-10-18
Implementation
2020-05-01
Centralized Committee
中国煤炭工业协会
Issuing Authority
国家市场监督管理总局、中国国家标准化管理委员会

Application Summary AI generated

This standard specifies the technical requirements for using microseismic monitoring to detect and assess rock burst hazards in underground coal mines. It is applied to continuously monitor seismic events generated by mining activities, enabling real-time identification of stress accumulation and fracture development in surrounding rock. The method supports early warning systems and guides the implementation of pressure relief measures to prevent dynamic disasters in deep or high-stress mining environments.

Related Standards

GB/T 20104-2006 Method for identifying tendency of coal to spontaneous combustion by oxygen absorption with chromatograph GB/T 23561.9-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 9: Methods for determining the triaxial strength and deformation parameters of coal and rock GB/T 23561.8-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 8: Methods for determining the deformation parameters of coal and rock GB/T 23561.7-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 7: Methods for determining the uniaxial compressive strength and counting softening coefficient GB/T 23561.6-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 6: Methods for determining the moisture content of coal and rock GB/T 23561.5-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 5: Methods for determining the water absorbability of coal and rock GB/T 23561.4-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 4: Methods for calculating the porosity of coal and rock GB/T 23561.3-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 3: Methods for determining the block density of coal and rock
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.