GB/T 25217.1-2010

Active

Methods for test, monitoring and prevention of rock burst - Part 1: Classification and laboratory test method on bursting liability of roof strata

冲击地压测定、监测与防治方法 第1部分：顶板岩层冲击倾向性分类及指数的测定方法

Standard Type
GBT
ICS
73.010
CCS
D04
Status
Active
Issue Date
2010-09-26
Implementation
2011-02-01
Centralized Committee
中国煤炭工业协会
Issuing Authority
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

Application Summary AI generated

This standard specifies the classification criteria and laboratory testing methods for assessing the bursting liability of roof strata in underground coal mines. It is applied by mining engineers and geotechnical laboratories to evaluate the potential for rock bursts in mine roof layers, enabling the classification of strata into weak, moderate, or strong bursting categories. The standard supports mine safety planning by providing a basis for selecting appropriate monitoring and prevention measures in high-stress mining environments.

Related Standards

GB/T 20104-2006 Method for identifying tendency of coal to spontaneous combustion by oxygen absorption with chromatograph GB/T 23561.9-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 9: Methods for determining the triaxial strength and deformation parameters of coal and rock GB/T 23561.8-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 8: Methods for determining the deformation parameters of coal and rock GB/T 23561.7-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 7: Methods for determining the uniaxial compressive strength and counting softening coefficient GB/T 23561.6-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 6: Methods for determining the moisture content of coal and rock GB/T 23561.5-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 5: Methods for determining the water absorbability of coal and rock GB/T 23561.4-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 4: Methods for calculating the porosity of coal and rock GB/T 23561.3-2009 Methods for determining the physical and mechanical properties of coal and rock - Part 3: Methods for determining the block density of coal and rock
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.