GB/T 24204-2025
ActiveIron ores for blast furnace feedstocks—Determination of low-temperature reduction-disintegration indices—Dynamic method
高炉炉料用铁矿石 低温还原粉化率的测定 动态试验法
Application Summary AI generated
This standard specifies a dynamic testing method for determining the low-temperature reduction-disintegration indices of iron ores used as blast furnace feedstocks. It is applied in the mining and steelmaking industries to evaluate how iron ore pellets or sinter behave under reducing conditions at low temperatures, simulating the upper zone of a blast furnace. The test helps predict ore degradation during handling and reduction, ensuring feedstock quality for efficient blast furnace operation.
Related Standards
GB/T 1819.7-2004
Methods for chemical analysis of tin concentrates--Determination of bismuth content--Flame atomicabsorption spectrometric method
GB/T 1819.5-2004
Methods for chemical analysis of tin concentrates--Determination of arsenic content--The molybdoantimonyarsenate blue spectrophotometric method and the distillation-iodimetric titrimetric method
GB/T 1819.3-2004
Methods for chemical analysis of tin concentrates--Determination of iron content--The cerium sulfate titrimetric method
GB/T 1819.4-2004
Methodsfor chemical analysis of tin concentrates--Determination of lead content--Flameatomic absorption spectrometric method and EDTA titrimetric method
GB/T 1819.13-2004
Methodsfor chemical analysis of tin concentrates--Determination of magnesium oxide andcalcium oxide contents--Flame atomic absorption spectrometric method
GB/T 1819.2-2004
Methods for chemical analysis of tin concentrates--Determination of tin content--The potassium iodate titrimetric method
GB/T 1819.12-2004
Methods for chemical analysis of tin concentrates--Determination of silicon dioxide content--The silicomolybdenum blue spectrophotometric method
GB/T 1819.8-2004
Methods for chemical analysis of tin concentrates--Determination of zinc content--Flame atomic absorption spectrometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.