GB/T 24195-2009
ActiveCorrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, “dry” and “wet” conditions
金属和合金的腐蚀 酸性盐雾、“干燥”和“湿润”条件下的循环加速腐蚀试验
Application Summary AI generated
This standard specifies a cyclic accelerated corrosion test method that exposes metallic materials and alloys to alternating conditions of acidified salt spray, dry air, and humid air. It is applied in industries such as automotive, aerospace, and coatings manufacturing to evaluate the corrosion resistance of materials and protective coatings under simulated aggressive environments. The test is particularly relevant for quality control and comparative assessment of products like fasteners, body panels, and structural components.
Related Standards
GB/T 19291-2003
Corrosion of metals and alloys--General principles for corrosion testing
GB/T 19292.4-2003
Corrosion of metals and alloys--Corrosivity of atmospheres--Determination of corrosion rate of standard specimens for the evaluation of corrosivity
GB/T 19292.2-2003
Corrosion of metals andalloys--Corrosivity of atmospheres--Guiding values for the corrosivity categories
GB/T 19292.3-2003
Corrosion of metals and alloys--Corrosivity of atmospheres--Measurement of pollution
GB/T 19292.1-2003
Corrosion of metals and alloys--Corrosivity of atmospheres--Classification
GB/T 19746-2005
Corrosion of metals and alloys-Alternate immersion test in salt solution
GB/T 19745-2005
Corrosion tests in artificial atmosphere at very low Concentrations of polluting gas(es)
GB/T 19747-2005
Corrosion of metals and alloys-Determination of bimetallic Corrosion in outdoor exposure corrosion tests
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.