GB/T 23909.2-2009
ActiveNon-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices
无损检测 射线透视检测 第2部分：成像装置长期稳定性的校验
Application Summary AI generated
This standard specifies the procedure for verifying the long-term stability of radioscopic imaging devices used in non-destructive testing. It is applied in industrial settings, such as manufacturing and quality control, to ensure consistent image quality over time for X-ray inspection systems. The standard is particularly relevant for periodic checks in production environments where reliable flaw detection in materials and components is critical.
Related Standards
GB/Z 41289-2022
Non-destructive testing instruments—Evaluation procedures
GB/Z 41285.5-2022
Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part5:Building precautionary measures of radiation protection for the γ radiography
GB/Z 41285.6-2022
Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part 6:Inspection,service and functional test of mobile apparatus for γ radiography
GB/Z 41286-2022
Non-destructive testing instruments—X-ray pipeline crawlers
GB/Z 41285.1-2022
Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part 1:Stationary and mobile handling for γ radiography
GB/Z 41285.3-2022
Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part 3: Organization of radiation protection during handling and transport for γ radiography
GB/Z 41285.4-2022
Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part 4:Construction and testing of mobile apparatus for γ radiography
GB/Z 41399-2022
Non-destructive testing instruments—Industrial digital X-ray imaging system
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.