GB/T 23607-2009
ActiveMethods for chemical analysis of copper anode mud - Determination of arsenic，bismuth，iron，nickel，lead，antimony，selenium and tellurium content - Inductively coupled plasma-atomic emission spectrometry
铜阳极泥化学分析方法 砷、铋、铁、镍、铅、锑、硒、碲量的测定 电感耦合等离子体原子发射光谱法
Application Summary AI generated
This standard specifies an inductively coupled plasma-atomic emission spectrometry (ICP-AES) method for simultaneously determining the content of eight elements—arsenic, bismuth, iron, nickel, lead, antimony, selenium, and tellurium—in copper anode mud. It is applied in the metallurgical industry for quality control and process monitoring during the electrolytic refining of copper, where accurate analysis of these impurities in anode slime is critical for optimizing recovery and assessing material value.
Related Standards
GB/T 5153-2003
Designation and composition of wrought magnesium and magnesium alloys
GB/T 12690.13-2003
Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum
GB/T 12690.11-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of magnesium content--Flame atomic absorptionspectrometric method
GB/T 12690.4-2003
Chemical analysis methods for non-rare earth impurities ofrare earth metals and their oxides--Determination of oxygen and nitrogen content--Impulse-infrared and impulse-thermal conductance absorption method
GB/T 12690.12-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of thorium content--Arsenazo III spectrophotometric method and inductively coupled plasma mass spectrum method
GB/T 12690.10-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of phosphorus content by molybdenum blue spectrophotometric method
GB/T 12690.5-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of Al、Cr、Mn、Fe、Co、Ni、Cu、Zn、Pb content by inductively coupled plasma atomic emission spectrographic method--Determination of Co、Mn、Pb、N
GB/T 12690.6-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of iron content--Kalium thiocyanate，1，10-phenanthroline spectrophotometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.