GB/T 23605-2009
AbolishedMethod for β transus temperature determination of titanium alloys
钛合金β转变温度测定方法
Application Summary AI generated
This standard specifies the experimental procedure for determining the β transus temperature of titanium alloys, which is the critical temperature at which the alloy transitions from an alpha-beta phase to a single beta phase. It is applied in the metallurgical industry for quality control during the production and processing of titanium alloys, particularly in aerospace and medical device manufacturing where precise heat treatment parameters are essential. The method is used in laboratory testing to ensure consistent material properties and to guide forging, rolling, and annealing processes.
Related Standards
GB/T 5153-2003
Designation and composition of wrought magnesium and magnesium alloys
GB/T 12690.11-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of magnesium content--Flame atomic absorptionspectrometric method
GB/T 12690.4-2003
Chemical analysis methods for non-rare earth impurities ofrare earth metals and their oxides--Determination of oxygen and nitrogen content--Impulse-infrared and impulse-thermal conductance absorption method
GB/T 12690.12-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of thorium content--Arsenazo III spectrophotometric method and inductively coupled plasma mass spectrum method
GB/T 12690.10-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of phosphorus content by molybdenum blue spectrophotometric method
GB/T 12690.13-2003
Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum
GB/T 12690.5-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of Al、Cr、Mn、Fe、Co、Ni、Cu、Zn、Pb content by inductively coupled plasma atomic emission spectrographic method--Determination of Co、Mn、Pb、N
GB/T 12690.6-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of iron content--Kalium thiocyanate，1，10-phenanthroline spectrophotometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.