GB/T 23309-2009
ActiveAluminium-magnesium alloy wires for shield in cable
电缆屏蔽用铝镁合金线
Application Summary AI generated
This standard specifies the technical requirements, test methods, inspection rules, and packaging for aluminium-magnesium alloy wires used as shielding braids in cables. It is applied in the manufacturing of communication cables, control cables, and power cables where electromagnetic interference (EMI) shielding is required, ensuring mechanical strength and corrosion resistance. The standard is primarily used by cable manufacturers and quality inspection bodies to verify wire dimensions, tensile properties, and electrical conductivity.
Related Standards
GB/T 19666-2005
Flame retardant and fire resistant wires and cables General
GB/T 6108.3-2003
Basic dimensions of winding wires--Part 3: Dimensions of conductors of insulated rectangular copper winding wires
GB/T 19216.21-2003
Tests for electric cables under fire conditions--Circuit integrity--Part 21: Procedures and requirements--Cables of rated voltage up to and including 0.6/1.0kV
GB/T 19216.11-2003
Tests for electric cables under fire conditions--Circuit integrity--Part 11: Apparatus--Fire alone at a flame temperature of at least 750℃
GB/T 6108.2-2003
Basic dimensions of winding wires--Part 2: Maximum overall diameters of enamelled round winding wires
GB/T 18889-2002
Electric cables-test methods for accessories for power cables with rated voltages from 6kV(Um=7.2kV)up to 35kV(Um=40.5kV)
GB/T 18487.3-2001
Electric vehicle conductive charging system--A.C./D.C.electric vehicle charging station
GB/T 18487.2-2001
Electric vehicle conductive charging system--Electric vehicles requirements for conductiveconnection to an A.C./D.C.supply
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.