GB/T 2315-2000
AbolishedNominal failing load series and coupling dimensions for electric power fittings
电力金具 标称破坏载荷系列及连接型式尺寸
Application Summary AI generated
This standard specifies the series of nominal failing loads and the coupling dimensions for electric power fittings used in overhead transmission and distribution lines. It is applied by manufacturers and engineers to ensure mechanical compatibility and strength consistency between fittings such as clamps, connectors, and suspension hardware. The standard is critical for design, procurement, and testing in the electric power industry to guarantee safe and reliable line operation under mechanical stress.
Related Standards
GB/T 19663-2005
Terms for Lightning Protection of Information system
GB/Z 14429-2005
Telecontrol equipmet and systems Part1:General considerations Section3:Glossary
GB/Z 25320.1-2010
Power systems management and associated information exchange - Data and communications security - Part 1: Communication network and system security -Introduction to security issues
GB/Z 25320.4-2010
Power systems management and associated information exchange - Data and communications security - Part 4: Profiles including MMS
GB/Z 25320.3-2010
Power systems management and associated information exchange - Data and communications security - Part 3: Communication network and system security -Profiles including TCP/IP
GB/Z 25320.6-2011
Power systems management and associated information exchange - Data and communications security - Part 6: Security for IEC 61850
GB/Z 25320.5-2013
Power systems management and associated information exchange - Data and communications security - Part 5: Security for GB/T 18657 and derivatives
GB/Z 25320.2-2013
Power systems management and associated information exchange - Data and communications security - Part 2: Glossary of terms
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.