GB/T 20899.9-2007
AbolishedMethods for chemical analysis of gold ores - Part 9：Determination of carbon contents
金矿石化学分析方法 第9部分：碳量的测定
Application Summary AI generated
This standard specifies the method for determining the carbon content in gold ores, applicable to the mining and metallurgical industries for quality control and ore evaluation. It is used in laboratories conducting chemical analysis of gold ore samples to measure carbon levels, which is critical for assessing ore processing characteristics and potential carbonaceous interference in gold recovery. The method supports accurate characterization of gold ores during exploration, beneficiation, and extraction processes.
Related Standards
GB/T 1819.4-2004
Methodsfor chemical analysis of tin concentrates--Determination of lead content--Flameatomic absorption spectrometric method and EDTA titrimetric method
GB/T 1819.7-2004
Methods for chemical analysis of tin concentrates--Determination of bismuth content--Flame atomicabsorption spectrometric method
GB/T 1819.3-2004
Methods for chemical analysis of tin concentrates--Determination of iron content--The cerium sulfate titrimetric method
GB/T 1819.2-2004
Methods for chemical analysis of tin concentrates--Determination of tin content--The potassium iodate titrimetric method
GB/T 1819.5-2004
Methods for chemical analysis of tin concentrates--Determination of arsenic content--The molybdoantimonyarsenate blue spectrophotometric method and the distillation-iodimetric titrimetric method
GB/T 1819.13-2004
Methodsfor chemical analysis of tin concentrates--Determination of magnesium oxide andcalcium oxide contents--Flame atomic absorption spectrometric method
GB/T 1819.12-2004
Methods for chemical analysis of tin concentrates--Determination of silicon dioxide content--The silicomolybdenum blue spectrophotometric method
GB/T 1819.8-2004
Methods for chemical analysis of tin concentrates--Determination of zinc content--Flame atomic absorption spectrometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.