GB/T 20019-2005
ActiveThermal spraying -- Acceptance inspection of thermal spraying equipment
热喷涂 热喷涂设备的验收检查
Application Summary AI generated
This standard specifies the acceptance inspection procedures and technical requirements for thermal spraying equipment, including spray guns, powder feeders, and control systems. It is applied in manufacturing industries to verify that newly purchased or repaired thermal spraying equipment meets operational safety and performance specifications before being put into production use.
Related Standards
GB/T 19356-2003
Thermal spraying--Powders--Composition and technical supply conditions
GB/T 9792-2003
Conversion coatings on metallic materials--Determination of coating mass per unit area--Gravimetric methods
GB/T 9791-2003
Chromate conversion coatings on zinc，cadmium，aluminium-zinc alloys and zinc-aluminium alloys--Test methods
GB/T 4956-2003
Non-magnetic coatings on magnetic substrates--Measurement of coating thickness--Magnetic method
GB/T 4957-2003
Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness--Eddy current
GB/T 19354-2003
Vitreous and porcelain enamels for aluminium--Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
GB/T 19353-2003
Vitreous and porcelain enamels--Corrosion tests in closed systems
GB/T 19355-2003
Protection against corrosion ofiron and steel in structures--Zinc and aluminum coatings--Guidelines
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.