GB/T 19799.1-2005
AbolishedNon-destructive testing-Ultrasonic testing-Calibration block No.1
无损检测 超声检测 1 号校准试块
Application Summary AI generated
GB/T 19799.1-2005 specifies the material, dimensions, and acoustic requirements for Calibration Block No.1, used to calibrate ultrasonic testing equipment and verify system performance in non-destructive testing. It is applied in industries such as manufacturing, aerospace, and petrochemicals for flaw detection in metal components, welds, and forgings. The standard ensures consistent sensitivity and accuracy of ultrasonic probes and instruments during routine inspections and acceptance testing.
Related Standards
GB/Z 41285.6-2022
Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part 6:Inspection,service and functional test of mobile apparatus for γ radiography
GB/Z 41285.5-2022
Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part5:Building precautionary measures of radiation protection for the γ radiography
GB/Z 41289-2022
Non-destructive testing instruments—Evaluation procedures
GB/Z 41285.3-2022
Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part 3: Organization of radiation protection during handling and transport for γ radiography
GB/Z 41286-2022
Non-destructive testing instruments—X-ray pipeline crawlers
GB/Z 41285.1-2022
Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part 1:Stationary and mobile handling for γ radiography
GB/Z 41285.4-2022
Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part 4:Construction and testing of mobile apparatus for γ radiography
GB/Z 41399-2022
Non-destructive testing instruments—Industrial digital X-ray imaging system
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.