GB/T 19350-2012
ActiveMetallic and other inorganic coatings - Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
金属和其它无机覆盖层 为减少氢脆危险的涂覆后钢铁的处理
Application Summary AI generated
This standard specifies post-coating treatment processes, such as baking, for iron or steel components to reduce the risk of hydrogen embrittlement caused by electroplating or other coating operations. It is applied in manufacturing industries, particularly for high-strength steel fasteners, springs, and automotive or aerospace parts, where hydrogen-induced cracking could lead to catastrophic failure. The standard provides guidelines for time, temperature, and environmental conditions to ensure the treated parts meet safety and performance requirements.
Related Standards
GB/T 19356-2003
Thermal spraying--Powders--Composition and technical supply conditions
GB/T 9792-2003
Conversion coatings on metallic materials--Determination of coating mass per unit area--Gravimetric methods
GB/T 19354-2003
Vitreous and porcelain enamels for aluminium--Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
GB/T 4956-2003
Non-magnetic coatings on magnetic substrates--Measurement of coating thickness--Magnetic method
GB/T 4957-2003
Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness--Eddy current
GB/T 9791-2003
Chromate conversion coatings on zinc，cadmium，aluminium-zinc alloys and zinc-aluminium alloys--Test methods
GB/T 19353-2003
Vitreous and porcelain enamels--Corrosion tests in closed systems
GB/T 19355-2003
Protection against corrosion ofiron and steel in structures--Zinc and aluminum coatings--Guidelines
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.