GB/T 18154-2000
ActiveTechnical specification of automatic dust explosion suppression devices
监控式抑爆装置技术要求
Application Summary AI generated
This standard specifies the technical requirements, test methods, and inspection rules for automatic dust explosion suppression devices used in industrial environments where combustible dust is present, such as in grain processing, coal mining, and chemical manufacturing. It is applied to ensure these devices can detect and suppress dust explosions in their early stages, minimizing damage to facilities and personnel. The standard is primarily used by manufacturers for product design and quality control, and by safety inspectors for compliance verification in hazardous dust-handling operations.
Related Standards
GB/T 15604-1995
Terminology for dust explosion prevention
GB/T 17919-2008
Directives for dust explosion protection for dust collectors in dust explosion hazardous area
GB/T 15605-2008
Guide for pressure venting of dust explosions
GB/T 15604-2008
Terminology for dust explosion prevention
GB/T 14566.4-2011
Specification and type for bursting discs - Part 4：Graphite bursting discs
GB/T 14566.3-2011
Specification and type for bursting discs - Part 3：Flat bursting discs
GB/T 14566.2-2011
Specification and type for bursting discs - Part 2：Reverse domed bursting discs
GB/T 14566.1-2011
Specification and type for bursting discs - Part 1：Conventional domed bursting discs
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.