GB/T 16895.7-2009
AbolishedLow-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations
低压电气装置 第7-704部分：特殊装置或场所的要求 施工和拆除场所的电气装置
Application Summary AI generated
This standard specifies safety requirements for low-voltage electrical installations on construction and demolition sites, covering temporary power distribution, cable routing, and equipment protection against mechanical damage and moisture. It is applied by electrical engineers and site managers to ensure compliance with Chinese national safety codes during building projects, demolition work, and renovation activities. The standard addresses unique hazards like exposed conductors, wet conditions, and mobile equipment, reducing risks of electric shock and fire in these temporary, high-risk environments.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.