GB/T 16895.5-2012
ActiveLow-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
低压电气装置 第4-43部分：安全防护 过电流保护
Application Summary AI generated
This standard specifies requirements for protecting low-voltage electrical installations against overcurrents, including overloads and short circuits, to ensure safety. It is applied in the design, erection, and verification of electrical systems in buildings and similar structures, such as residential, commercial, and industrial premises. The standard guides engineers and inspectors in selecting protective devices like circuit breakers and fuses to prevent fire and equipment damage.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.