GB/T 16895.34-2018
ActiveLow-voltage electrical installations—Part 7-753: Requirements for special installations or locations—Heating cables and embedded heating systems
低压电气装置 第7-753 部分：特殊装置或场所的要求 加热电缆及埋入式加热系统
Application Summary AI generated
This standard specifies safety and installation requirements for low-voltage heating cables and embedded heating systems, including floor, ceiling, and wall heating. It is applied in residential, commercial, and industrial buildings to ensure proper design, protection against overheating, and compliance with electrical safety during installation and operation.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.