GB/T 16895.3-2017

Abolished

Low-voltage electrical installations—Part 5-54: Selection and erection of electrical equipment—Earthing arrangements and protective conductors

低压电气装置 第5-54部分：电气设备的选择和安装 接地配置和保护导体

Standard Type
GBT
ICS
91.140.50
CCS
Q77
Status
Abolished
Issue Date
2017-07-31
Implementation
2018-02-01
Centralized Committee
国家标准委
Issuing Authority
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

Application Summary AI generated

This standard specifies requirements for the selection and erection of earthing arrangements and protective conductors in low-voltage electrical installations. It is applied in the construction industry for designing and installing safe grounding systems in buildings, ensuring protection against electric shock and fire hazards. The standard is used by electrical engineers and contractors during the installation and inspection of residential, commercial, and industrial electrical systems.

Related Standards

GB/T 19249-2003 Reverse osmosis water treatment equipment GB/T 16895.3-2004 Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors GB/T 7725-2004 Room air conditioners GB/T 16895.22-2004 Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages GB/Z 28598-2012 Study of the use of lifts for evacuation during an emergency GB/Z 28597-2012 Lifts and escalators subject to seismic conditions - Compilation report GB/Z 31822-2015 Study report on the safety requirements of public service escalators and moving walks GB/Z 35850.3-2021 Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.