GB/T 16895.1-2008

Active

Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics,definitions

低压电气装置 第1部分: 基本原则、一般特性评估和定义

Standard Type
GBT
ICS
91.140.50
CCS
Q77
Status
Active
Issue Date
2008-06-19
Implementation
2009-04-01
Centralized Committee
国家标准委
Issuing Authority
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

Application Summary AI generated

This standard establishes the fundamental principles, definitions, and general characteristics for designing, erecting, and verifying low-voltage electrical installations. It is applied in the construction industry for residential, commercial, and industrial buildings to ensure electrical safety and compatibility. The standard serves as the foundational reference for all subsequent parts of the GB/T 16895 series, guiding engineers and inspectors in assessing installation parameters like voltage, current, and external influences.

Related Standards

GB/T 19249-2003 Reverse osmosis water treatment equipment GB/T 16895.3-2004 Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors GB/T 7725-2004 Room air conditioners GB/T 16895.22-2004 Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages GB/Z 28598-2012 Study of the use of lifts for evacuation during an emergency GB/Z 28597-2012 Lifts and escalators subject to seismic conditions - Compilation report GB/Z 31822-2015 Study report on the safety requirements of public service escalators and moving walks GB/Z 35850.3-2021 Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.