GB/T 1681-2009
ActiveRubber - Determination of rebound resilience of vulcanizates
硫化橡胶回弹性的测定
Application Summary AI generated
This standard specifies a method for determining the rebound resilience of vulcanized rubber using a pendulum-type impact tester. It is applied in the rubber industry for quality control and material characterization, particularly for products like tires, seals, and conveyor belts where energy absorption and elastic recovery are critical. The test measures the ratio of rebound height to drop height, providing data on the material's elasticity under dynamic loading conditions.
Related Standards
NY/T 735-2003
Raw natural rubber - Technical rule for production of radial tire rubber
GB/T 7761-2003
Rubber--Determination of adhesion to rigid materials using conical shaped parts
GB/T 19243-2003
Rubber，vulcanized or thermoplastic--Methods of test for staining in contact with organic material
GB/T 19242-2003
Rubber，vulcanized--Determination of creep in compression or shear
GB/T 7755-2003
Rubber，vulcanized of thermoplastic--Determination of permeability to gases
GB/T 11202-2003
Rubber--Determination of iron content--1，10-Phenanthroline photometric method
GB/T 9881-2003
Rubber--Vocabulary
GB/T 7760-2003
Rubber，vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.