GB/T 16484.5-2009
ActiveChemical analysis methods of rare earth chloride and light rare earth carbonate - Part 5: Determination of barium oxide content - Inductively coupled plasma atomic emission spectrometry
氯化稀土、碳酸轻稀土化学分析方法 第5部分：氧化钡量的测定 电感耦合等离子体发射光谱法
Application Summary AI generated
This standard specifies the inductively coupled plasma atomic emission spectrometry (ICP-AES) method for determining barium oxide content in rare earth chloride and light rare earth carbonate. It is applied in the metallurgy and rare earth industries for quality control and chemical analysis of these raw materials, ensuring accurate measurement of barium oxide impurities during production and processing.
Related Standards
GB/T 5153-2003
Designation and composition of wrought magnesium and magnesium alloys
GB/T 12690.11-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of magnesium content--Flame atomic absorptionspectrometric method
GB/T 12690.13-2003
Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum
GB/T 12690.10-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of phosphorus content by molybdenum blue spectrophotometric method
GB/T 12690.4-2003
Chemical analysis methods for non-rare earth impurities ofrare earth metals and their oxides--Determination of oxygen and nitrogen content--Impulse-infrared and impulse-thermal conductance absorption method
GB/T 12690.12-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of thorium content--Arsenazo III spectrophotometric method and inductively coupled plasma mass spectrum method
GB/T 12690.5-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of Al、Cr、Mn、Fe、Co、Ni、Cu、Zn、Pb content by inductively coupled plasma atomic emission spectrographic method--Determination of Co、Mn、Pb、N
GB/T 12690.6-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of iron content--Kalium thiocyanate，1，10-phenanthroline spectrophotometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.