GB/T 16477.2-2010
ActiveChemical analysis methods of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy - Part 2: Determination of calcium, magnesium and manganese contents - Inductively coupled plasma atomic emission spectrometry
稀土硅铁合金及镁硅铁合金化学分析方法 第2部分：钙、镁、锰量的测定 电感耦合等离子体发射光谱法
Application Summary AI generated
This standard specifies the inductively coupled plasma atomic emission spectrometry (ICP-AES) method for determining calcium, magnesium, and manganese content in rare earth ferrosilicon alloys and rare earth ferrosilicon magnesium alloys. It is applied in the metallurgical industry for quality control and chemical analysis of these alloys, which are used as additives in steelmaking and nodular iron production. The standard ensures accurate and consistent measurement of these elements to verify alloy composition and performance.
Related Standards
GB/T 5153-2003
Designation and composition of wrought magnesium and magnesium alloys
GB/T 12690.11-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of magnesium content--Flame atomic absorptionspectrometric method
GB/T 12690.10-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of phosphorus content by molybdenum blue spectrophotometric method
GB/T 12690.12-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of thorium content--Arsenazo III spectrophotometric method and inductively coupled plasma mass spectrum method
GB/T 12690.13-2003
Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum
GB/T 12690.4-2003
Chemical analysis methods for non-rare earth impurities ofrare earth metals and their oxides--Determination of oxygen and nitrogen content--Impulse-infrared and impulse-thermal conductance absorption method
GB/T 12690.5-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of Al、Cr、Mn、Fe、Co、Ni、Cu、Zn、Pb content by inductively coupled plasma atomic emission spectrographic method--Determination of Co、Mn、Pb、N
GB/T 12690.6-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of iron content--Kalium thiocyanate，1，10-phenanthroline spectrophotometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.