GB/T 15970.4-2000
ActiveCorrosion of metals and alloys--Stress corrosion testing--Part 4:Preparation and use of uniaxially loaded tension specimens
金属和合金的腐蚀 应力腐蚀试验 第4部分:单轴加载拉伸试样的制备和应用
Application Summary AI generated
This standard specifies the procedures for preparing and using uniaxially loaded tension specimens to evaluate the susceptibility of metals and alloys to stress corrosion cracking. It is applied in materials testing laboratories and quality control for industries such as aerospace, chemical processing, and oil and gas, where components are exposed to corrosive environments under tensile stress. The standard ensures consistent specimen geometry, loading methods, and test conditions for reliable comparison of stress corrosion behavior across different materials.
Related Standards
GB/T 19292.3-2003
Corrosion of metals and alloys--Corrosivity of atmospheres--Measurement of pollution
GB/T 19292.4-2003
Corrosion of metals and alloys--Corrosivity of atmospheres--Determination of corrosion rate of standard specimens for the evaluation of corrosivity
GB/T 19292.2-2003
Corrosion of metals andalloys--Corrosivity of atmospheres--Guiding values for the corrosivity categories
GB/T 19292.1-2003
Corrosion of metals and alloys--Corrosivity of atmospheres--Classification
GB/T 19291-2003
Corrosion of metals and alloys--General principles for corrosion testing
GB/T 19745-2005
Corrosion tests in artificial atmosphere at very low Concentrations of polluting gas(es)
GB/T 19746-2005
Corrosion of metals and alloys-Alternate immersion test in salt solution
GB/T 19747-2005
Corrosion of metals and alloys-Determination of bimetallic Corrosion in outdoor exposure corrosion tests
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.